Latest topics
» cruiser 80 brakes
Yesterday at 9:35 pm by intrudin

» oil seals for mid 50s rear shocks
Sun Feb 18, 2018 9:07 pm by bill2b

» oil seals for mid 50s rear shocks
Sun Feb 18, 2018 7:37 pm by bill2b

» More carb problems
Sun Feb 18, 2018 7:26 pm by Sgtbiro

» trials shake down run( a few teething problems) bike and rider
Sun Feb 18, 2018 7:26 pm by denman

» cruiser sports
Sun Feb 18, 2018 5:37 pm by sportscruiser

» Villiers gearbox dipstick for sale
Sun Feb 18, 2018 8:51 am by John Wakefield

» plating on falcon 67
Sat Feb 17, 2018 9:28 am by alan67

» 1954 Falcon 67
Thu Feb 15, 2018 10:51 pm by keith livingstone


1932?? Fanny B

Go down

1932?? Fanny B

Post  AussieFB on Tue Feb 13, 2018 11:53 pm

Hi all, I am new here from Perth Australia. I have a FB which I am hoping I could get some info on. I believe it is around 1932ish? Any help would be appreciated. Cheers Greg




AussieFB

Posts : 3
Join date : 2018-02-13

Back to top Go down

Re: 1932?? Fanny B

Post  AussieFB on Tue Feb 13, 2018 11:57 pm

It was my inlaws bike up until a couple of years ago,my mother in law used to ride it a bit in rallys. It then sat in a container for roughly 40 years in which I pulled it out and gave it a spit and polish. It took a little bit to get it running but is now running. It has a 148cc 2 stroke motor coupled to a 3 speed suicide shift. The tyres are about 45 years old and need replacing as they are solid haha

AussieFB

Posts : 3
Join date : 2018-02-13

Back to top Go down

year/model

Post  piston 197 on Wed Feb 14, 2018 7:11 am

The frame No has an identifier letter if after 1930
1931=A
1932=B etc.

so will be easy to check the year, it is a bit more difficult to identify the model, Kestrel/Merlin the base model had villiers flywheel magneto, whereas the Lapwing had miller coil.
your primary chaincase appears to have been modified to take a magneto ??? difficult to see from the l/hand side.
There were two 150cc engines used at this period the XIIC and the VIIIC ( 12c and 8c) the engine No will help further, the engine type is also cast in Roman numerals on the cylinder

JH
avatar
piston 197
Moderator

Posts : 3745
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

What's This

Post  kerabo on Wed Feb 14, 2018 8:16 am

I had a new member join yesterday with a bike almost the same who is not sure.
His bikes details are

Frame No. A21291

Engine Villiers 2E No. X21578

Can you identify for my database.

Thanks Ken
avatar
kerabo

Posts : 2217
Join date : 2008-02-11
Age : 67
Location : Falcon 87. Trials 93 Special. Powerbike 56. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

Re: 1932?? Fanny B

Post  Rex Stewart on Wed Feb 14, 2018 10:37 am

Great bike thanks for posting these photos.

Rex Stewart

Posts : 21
Join date : 2017-09-21
Age : 67
Location : Aberdeenshire

Back to top Go down

Frame i.d.

Post  piston 197 on Wed Feb 14, 2018 11:24 am

Ken frame No beginning A is 1931
think the engine will be XZ1578 , not X21578

this would make it a 8C engine ( VIIIC) of 148cc ???
the 2E engine was pre-fixed KZ or KZS

now it is also possible the guy has quoted the cast number off the cylinder rather than the engine No, get him to look again on the crankcase to find a stamped in number and then i might be able to tell you what he has, but the engine No. does not make sense !

JH
avatar
piston 197
Moderator

Posts : 3745
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

What Bike

Post  kerabo on Wed Feb 14, 2018 11:58 am

Thank you John
I will pass that on

Ken
avatar
kerabo

Posts : 2217
Join date : 2008-02-11
Age : 67
Location : Falcon 87. Trials 93 Special. Powerbike 56. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

Re: 1932?? Fanny B

Post  ScottT on Wed Feb 14, 2018 9:27 pm

XZ is a 2E engine number KZ or KZS is the twin port engine XZ is a single port.
My 196cc 2E has XZ3737 as the engine number.
avatar
ScottT

Posts : 48
Join date : 2015-06-30

Back to top Go down

Re: 1932?? Fanny B

Post  AussieFB on Thu Feb 15, 2018 3:47 am

piston 197 wrote:The frame No has an identifier letter if after 1930
1931=A
1932=B etc.

so will be easy to check the year, it is a bit more difficult to identify the model, Kestrel/Merlin the base model had villiers flywheel magneto, whereas the Lapwing had miller coil.
your primary chaincase appears to have been modified to take a magneto ??? difficult to see from the l/hand side.
There were two 150cc engines used at this period the XIIC and the VIIIC ( 12c and 8c) the engine No will help further, the engine type is also cast in Roman numerals on the cylinder

JH

Thanks for the info, the engine is an XIIC. I will check the frame number when I get home later. The frame number was hard to read last time I looked at it but for memory had a "C" in it.... I will also check the magneto and try and put a couple more pics up. Thanks again

AussieFB

Posts : 3
Join date : 2018-02-13

Back to top Go down

Re: 1932?? Fanny B

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum