Latest topics
» F B Spares
Yesterday at 9:01 pm by bill2b

» Cruiser 89 air filter for Viliers 4T engine
Yesterday at 4:39 pm by piston 197

» Fulmar Speedo on ebay
Yesterday at 12:59 pm by fulmar88

» What's this from
Yesterday at 10:09 am by john87

» tank badge fixing screws
Yesterday at 1:39 am by intrudin

» Plover with Engine Number 12T 5090
Mon Nov 20, 2017 8:49 pm by Farley

» wheel nut
Mon Nov 20, 2017 11:30 am by alan67

» Fuel Tank cap
Sun Nov 19, 2017 9:00 pm by bill2b

» Age etc of plover please?
Sun Nov 19, 2017 6:57 pm by piston 197


basic questions ,..please bear with me

View previous topic View next topic Go down

basic questions ,..please bear with me

Post  Wafflojufflo on Thu Nov 09, 2017 11:12 am

Hi
I have purchased a 56 Falcon in trials  trim,to have a bit of a play in local pre 65 trials,and would welcome any help/advce/feedback

197 Villiers 3spd engine

basic stuff first

1/   what fuel ratio mix is best,..is unleaded ok ?
2/    what gear box oil is best,..will be changed regularly,as it leaks lol Very Happy
3/   the chap I bought off,said it has a modern clutch fitted to help with trials,i dont think it currently has any oil at all,in the clutch/primary case,is this ok?
4/     best stuff to use on the chain ??
5/      any other advice,is most welcome to help me on my way


I know its not gonna be super competitive,and might struggle to get round  (as will I),..but just after a bit of fun
thanks in advance Mick

Wafflojufflo

Posts : 3
Join date : 2017-07-22
Location : Derby

Back to top Go down

fuels and oils

Post  piston 197 on Thu Nov 09, 2017 11:45 am

I ran a Villiers engined trials FB for years and used
20/50 in the gearbox
33 to 1 fuel/oil mix in the tank , best petrol you can get with Silkolene two stroke oil
ATF ( automatic transmission fluid) in the clutch.

on the chain, anything you can get to stay on ! i used outdoor heavy duty gear lubricant spray, but it does make helluva mess!

JH
avatar
piston 197
Moderator

Posts : 3625
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Oil

Post  john87 on Fri Nov 10, 2017 11:50 am

Chain saw chain oil will stay on the chain, make no mistake about that!!

JH, what you think about using slideway oil on the chain?? It is tenacious, coolant resistant stuff, so i think it might be good for chains?? what you think??

john..

john87

Posts : 194
Join date : 2015-10-24

Back to top Go down

Pre 65

Post  kerabo on Fri Nov 10, 2017 2:20 pm

John

Where is local?

Have to come and watch

Ken
avatar
kerabo

Posts : 2124
Join date : 2008-02-11
Age : 67
Location : Falcon 87. Trials 93 Special. Powerbike 56. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

Re: basic questions ,..please bear with me

Post  Wafflojufflo on Fri Nov 10, 2017 6:17 pm

thanks very much lads, for the prompt replies,..just getting all my gear together piece by piece...,off to fetch a trailer this weekend hopefully, also ordered a trial helmet, really looking forward to it.
ps what tyre pressures are typically run in trials,..also any other tips ?

cheers Mick

Wafflojufflo

Posts : 3
Join date : 2017-07-22
Location : Derby

Back to top Go down

Re: basic questions ,..please bear with me

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum