Latest topics
» pivot tube
Yesterday at 5:54 pm by ernie

» Double lift centre stand
Yesterday at 4:24 pm by FB vincent

» Contact breaker screw
Yesterday at 1:56 pm by jasperbell

» AMC 250CC CARB
Thu Jan 18, 2018 7:44 pm by MR SINBAD

» VILLIERS 1H
Thu Jan 18, 2018 9:37 am by piston 197

» 8e gear lever
Wed Jan 17, 2018 1:45 pm by kerabo

» help wanted
Tue Jan 16, 2018 8:20 pm by Dickey0-1

» Cruiser 75 Generator Coils
Tue Jan 16, 2018 7:38 pm by peter@dunfordconstruction

» ITEMS FOR SALE OR WANTED
Mon Jan 15, 2018 6:31 pm by bill2b


Cruiser 75 sprocket

View previous topic View next topic Go down

Cruiser 75 sprocket

Post  Dodge 211 on Mon Oct 23, 2017 7:15 pm

Hi all I have a cruiser 75 with 18" wheels front and rear but I have no rear sprocket can anybody tell me how many teeth it should have,my friend has a similar bike but with a 48 tooth sprocket but in the handbook it says 52teeth any ideas ?Dodge 211

Dodge 211

Posts : 9
Join date : 2017-10-23

Back to top Go down

Sprocket

Post  kerabo on Mon Oct 23, 2017 7:37 pm

Roger.

Post it on the general chat or help wanted section of the Forum .It will then be seen
The Cruiser you have according to my list should have a 19" rear wheel so that will alter things. But don't hold me to it.
Regards Ken
avatar
kerabo

Posts : 2182
Join date : 2008-02-11
Age : 67
Location : Falcon 87. Trials 93 Special. Powerbike 56. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

rear sprocket

Post  piston 197 on Mon Oct 23, 2017 7:53 pm

The club had a batch made for the cruiser ( 52 teeth) some time back, there is one left if you need it ? I will p.m. you with price and address
JH
avatar
piston 197
Moderator

Posts : 3719
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Re: Cruiser 75 sprocket

Post  Dodge 211 on Tue Oct 24, 2017 7:35 pm

Thanks for the reply ,I'm not sure but I think at first 19" wheels were used then they went to 18" front and later 18" rear is this correct?

Dodge 211

Posts : 9
Join date : 2017-10-23

Back to top Go down

Wheel sizes

Post  piston 197 on Tue Oct 24, 2017 7:40 pm

Strangely no, the Cruiser 71 ( VB frame No 1955 ) had 19 back and front and the Cruiser 75 , 1956/7 ( frame No WB and YB)had the peculiar combination of 18 front and 19 back
Sprocket was the same except on the Cruiser 71 it was cast as part of the brake drum, the later machines the sprocket bolted on separately.
JH
avatar
piston 197
Moderator

Posts : 3719
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Re: Cruiser 75 sprocket

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum