Latest topics
» F B Spares
Yesterday at 9:01 pm by bill2b

» Cruiser 89 air filter for Viliers 4T engine
Yesterday at 4:39 pm by piston 197

» Fulmar Speedo on ebay
Yesterday at 12:59 pm by fulmar88

» What's this from
Yesterday at 10:09 am by john87

» tank badge fixing screws
Yesterday at 1:39 am by intrudin

» Plover with Engine Number 12T 5090
Mon Nov 20, 2017 8:49 pm by Farley

» wheel nut
Mon Nov 20, 2017 11:30 am by alan67

» Fuel Tank cap
Sun Nov 19, 2017 9:00 pm by bill2b

» Age etc of plover please?
Sun Nov 19, 2017 6:57 pm by piston 197


Falcon 81 rear brake..

View previous topic View next topic Go down

Falcon 81 rear brake..

Post  john87 on Sat Oct 21, 2017 12:03 pm

Hi all,

When you take your foot of the rear brake pedal, should the pedal be such that it comes to rest on the rubber part of the footrest, or the metal bit of the footrest itself BEHIND the rubber.

Second, In the makers book, they give instructions for fitting a rear brake light switch. They give a drawing and say something about; "Remove brake stop [shown in the exploded position] before fitting switch assembly"

What is a brake stop?? There is an "L" shaped piece of metal bolted behind one of the swinging arm nuts, but i have no idea what it is for or what it is supposed to do...

john..

john87

Posts : 194
Join date : 2015-10-24

Back to top Go down

Falcon rear Brake

Post  peter@dunfordconstruction on Sat Oct 21, 2017 1:35 pm

Hi John,

The brake stop is that angled triangulated piece bolted on. If you fit a stoplamp switch ( which are easily available )you have to remove the stop. You will also need as special bracket and new clevis pin for the brake arm & and an actuator arm. If you would like a photo please send me your E-mail address

Regards

Peter

peter@dunfordconstruction

Posts : 178
Join date : 2014-10-28
Location : Lymington Hampshire

http://peter@dunfordconstruction.co.uk

Back to top Go down

Re: Falcon 81 rear brake..

Post  john87 on Sat Oct 21, 2017 1:39 pm

Hi Peter,

What i need to know, is what it does when you do not have a stop light.. I would guess that the extended clevis pin butts up against it to set the height of the brake pedal??

I will send email now!!

john..

john87

Posts : 194
Join date : 2015-10-24

Back to top Go down

Re: Falcon 81 rear brake..

Post  peter@dunfordconstruction on Sat Oct 21, 2017 2:34 pm

John,

The Stop should act as a stop for the arm of the footrest.

Peter

peter@dunfordconstruction

Posts : 178
Join date : 2014-10-28
Location : Lymington Hampshire

http://peter@dunfordconstruction.co.uk

Back to top Go down

Contact

Post  kerabo on Mon Oct 23, 2017 7:28 am

peter@dunfordconstruction wrote:Hi John,

The brake stop is that angled triangulated piece bolted on.  If you fit a stoplamp switch ( which are easily available )you have to remove the stop. You will also need as special bracket and new clevis pin for the brake arm  & and  an actuator arm.  If you would like a photo please send me your E-mail address

Regards

Peter

Peter
I have sent you a PM

Regards Ken Booth
avatar
kerabo

Posts : 2124
Join date : 2008-02-11
Age : 67
Location : Falcon 87. Trials 93 Special. Powerbike 56. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

Re: Falcon 81 rear brake..

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum