Latest topics
» 1H engine/gearbox
Today at 1:58 am by seipgam

» Cruiser 75 sprocket
Yesterday at 7:53 pm by piston 197

» Front hub model 96
Yesterday at 7:34 pm by kerabo

» Villiers headgasket
Yesterday at 4:38 pm by kerabo

» Looking forward
Yesterday at 2:32 pm by kerabo

» Falcon 87 head gasket.
Yesterday at 12:54 pm by kerabo

» Falcon 81 rear brake..
Yesterday at 7:28 am by kerabo

» Is my coil faulty??
Sun Oct 22, 2017 10:23 pm by Druid

» Villiers S25/7
Sun Oct 22, 2017 7:34 pm by john87


1F engine help anybody.

View previous topic View next topic Go down

1F engine help anybody.

Post  Mollbhan on Fri Oct 13, 2017 3:59 pm

Hi all, I have a Villiers 98cc 1F engine which ran roughly, I found the crankcase gland seal was leaking badly. Nothing for it but a major engine strip down but the problem is on splitting the crankcase I cannot remove the crankshaft from the inner crankcase half. Obviously I do not want to be too brutal with it till I know just what I am doing, Has anyone stripped down a 1F engine to get at the gland seal? Any help would be appreciated, thanks.
avatar
Mollbhan

Posts : 26
Join date : 2017-05-05

Back to top Go down

Re: 1F engine help anybody.

Post  Mollbhan on Sat Oct 14, 2017 9:40 pm

Problem solved, careful use of a gas blowlamp on one part and iced water on the other persuaded everything to let go but these bronze gland seals must have been common on earlier 2 strokes, are they guilty of wearing out and leaking?
avatar
Mollbhan

Posts : 26
Join date : 2017-05-05

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum