Latest topics
» 1H engine/gearbox
Today at 1:58 am by seipgam

» Cruiser 75 sprocket
Yesterday at 7:53 pm by piston 197

» Front hub model 96
Yesterday at 7:34 pm by kerabo

» Villiers headgasket
Yesterday at 4:38 pm by kerabo

» Looking forward
Yesterday at 2:32 pm by kerabo

» Falcon 87 head gasket.
Yesterday at 12:54 pm by kerabo

» Falcon 81 rear brake..
Yesterday at 7:28 am by kerabo

» Is my coil faulty??
Sun Oct 22, 2017 10:23 pm by Druid

» Villiers S25/7
Sun Oct 22, 2017 7:34 pm by john87


Cruiser 80 1958 25T timing.

View previous topic View next topic Go down

Cruiser 80 1958 25T timing.

Post  digat on Thu Oct 12, 2017 4:08 pm

Hi
Newbie post. After looking through this forum for information about timing for a Cruiser I gather that the right
timing is "Ignition timing 1/4' btdc and point gap is .012" which seems right to me, but on looking through my
original instruction book for the Cruiser it states "Ignition timing is effected by measuring the piston 1/4" down
stroke"

can anyone shed light on this as it appears to me that the timing is after tdc which maybe's I am misreading.
cheers
Dave

digat

Posts : 2
Join date : 2017-10-01
Location : North East

Back to top Go down

Timing

Post  piston 197 on Thu Oct 12, 2017 5:00 pm

Timing will definitely be BTDC, ie 1/4" down from top position , but definitely on the UP stroke, timing it 1/4" after it has reached top dead centre and on the down stroke , will only be handy if you intend to run it backwards !?

JH
avatar
piston 197
Moderator

Posts : 3581
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum