Latest topics
» pivot tube
Today at 5:54 pm by ernie

» Double lift centre stand
Today at 4:24 pm by FB vincent

» Contact breaker screw
Today at 1:56 pm by jasperbell

» AMC 250CC CARB
Yesterday at 7:44 pm by MR SINBAD

» VILLIERS 1H
Yesterday at 9:37 am by piston 197

» 8e gear lever
Wed Jan 17, 2018 1:45 pm by kerabo

» help wanted
Tue Jan 16, 2018 8:20 pm by Dickey0-1

» Cruiser 75 Generator Coils
Tue Jan 16, 2018 7:38 pm by peter@dunfordconstruction

» ITEMS FOR SALE OR WANTED
Mon Jan 15, 2018 6:31 pm by bill2b


Missing part

View previous topic View next topic Go down

Missing part

Post  pecon on Mon May 22, 2017 2:54 pm


Just getting on with the rebuild and I find that I am missing the rear brake arm roller part number 002382 in the parts book, sometimes refered to as a swivel pin. I had everything bagged and tagged but when I opened the bag the pin was missing, sods law I suppose scratch .

If anyone can tell me where I can source one or if one off a different machine might work I would be most grateful. Unfortunately I dont have the facilities to make one up.

TIA

Peter

pecon

Posts : 25
Join date : 2017-02-16

Back to top Go down

roller

Post  Bigjim on Mon May 22, 2017 4:58 pm

Is it the one that goes in the split of the rear brake arm? Round bar, slight chamfer each end " hole through the middle. Sideways not end to end.
avatar
Bigjim

Posts : 134
Join date : 2016-06-13

Back to top Go down

Re: Missing part

Post  pecon on Mon May 22, 2017 5:20 pm

Sounds like a perfect description Bigjim. The threaded end of the rod from the brake pedal runs through it and the winged adjuster on one side.

pecon

Posts : 25
Join date : 2017-02-16

Back to top Go down

roller

Post  Bigjim on Mon May 22, 2017 6:18 pm

How desperate are you? Looking at my Drawing I made a few years year back, it should be 0.5" in diameter and 0.75" long, with a 17/64 hole, see the YELLOW bobbin in the rear plate

avatar
Bigjim

Posts : 134
Join date : 2016-06-13

Back to top Go down

Re: Missing part

Post  pecon on Mon May 22, 2017 6:35 pm

Well not quiet at the desperation stage, but getting there Neutral . If I don't have any luck locating something suitable I'll have a go at making something up. I did a quick check on the front one and the dementions are similar to yours, 1/2" diameter, .8" long.

Peter

pecon

Posts : 25
Join date : 2017-02-16

Back to top Go down

bobbin

Post  Bigjim on Mon May 22, 2017 7:00 pm

I will make one this week for you. Amazingly I found a length of SS 0.5" bar in the shed, I might even get one of my students to make a few. YES, we still do metalwork in schools!
avatar
Bigjim

Posts : 134
Join date : 2016-06-13

Back to top Go down

Re: Missing part

Post  pecon on Mon May 22, 2017 7:11 pm

That would be brilliant. I'll send on a PM with my details. Ah metalwork, I remember a teacher throwing something at me for leaving a chuck key in a lathe and leaving it unattended, a lesson never forgotten, Very Happy ,

pecon

Posts : 25
Join date : 2017-02-16

Back to top Go down

Re: Missing part

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum