Latest topics

Cruiser 80 forks

View previous topic View next topic Go down

Cruiser 80 forks

Post  Sgtbiro on Fri May 12, 2017 9:17 pm

Hi All just started to strip down my bike and have got as far as the forks both the rubber seals and the brass bushes will need replacing,does anyone know where or if i can buy these items anywhere.
Cheers Kevin..

Sgtbiro

Posts : 55
Join date : 2017-04-20

Back to top Go down

bushes

Post  Bigjim on Fri May 12, 2017 9:43 pm

I think John Harding, might have some, though you will need to unsolder the old ones & then re-solder the new ones back into place.
avatar
Bigjim

Posts : 104
Join date : 2016-06-13

Back to top Go down

Cruiser 80 forks

Post  Sgtbiro on Sat May 13, 2017 11:26 am


Thanks Bigjim will give him a try.

Sgtbiro

Posts : 55
Join date : 2017-04-20

Back to top Go down

bshes and seals

Post  piston 197 on Sat May 13, 2017 1:58 pm

Sorry not got any bushes , may have a good secondhand top section? with bushes
Fork seals are available from AMC classic spares and Villiers services

JH
avatar
piston 197
Moderator

Posts : 3544
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Fork bushes

Post  Sgtbiro on Sat May 13, 2017 6:20 pm

Hi John thanks for that, do you know any where else i might get the bushes from, the ones i took off the forks are not that bad so might just put them back on.
Cheers kevin.

Sgtbiro

Posts : 55
Join date : 2017-04-20

Back to top Go down

Fork bushes

Post  piston 197 on Sat May 13, 2017 6:28 pm

You could try Bantam John ( Sheffield classic motorcycles) 01246 290021
JH
avatar
piston 197
Moderator

Posts : 3544
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Re: Cruiser 80 forks

Post  Sgtbiro on Sat May 13, 2017 6:50 pm

Cheers John will do.

Sgtbiro

Posts : 55
Join date : 2017-04-20

Back to top Go down

Re: Cruiser 80 forks

Post  dalgrae on Sat May 13, 2017 6:57 pm

Hi piston 197. Can you please expain is AMC classic spares a different company to Villiers services as when I enter it as an address it seems to relate to AJS parts

Regards. Colin

dalgrae

Posts : 34
Join date : 2017-04-08
Age : 67
Location : Bristol

Back to top Go down

AMC classic spares

Post  piston 197 on Sat May 13, 2017 7:15 pm

It will do, as the same forks are used in AJS and Matchless 250cc machines , models 14 ( AJS) and G2 ( Matchless) ( NOT CSR models)
If you order seals for these machines they will be the same, ( and they may have bushes too ?)
JH
avatar
piston 197
Moderator

Posts : 3544
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Re: Cruiser 80 forks

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum