Latest topics
» Light Cruiser rebuild
Today at 8:50 pm by Cruiser79

» Pannier Equipment
Today at 8:37 pm by Grahamb

» Falcon 87 eBay
Today at 7:12 pm by colk2004

» Exhaust pipe question
Today at 11:57 am by Tony Rickwood

» Offtopic : James Comet L1 Petrol Tank
Sat Mar 25, 2017 10:37 pm by talha

» cruiser parts needed
Sat Mar 25, 2017 6:12 pm by piston 197

» 1934 cruiser
Thu Mar 23, 2017 9:29 pm by piston 197

» Parts stockist
Wed Mar 22, 2017 1:29 pm by kerabo

» I did it again , I am with James now.
Wed Mar 22, 2017 12:20 pm by talha


Falcon 87. Footrest spacers.

View previous topic View next topic Go down

Falcon 87. Footrest spacers.

Post  colk2004 on Fri Jan 13, 2017 5:16 pm

Still waiting for a few bits from the powder coaters - tank, sidepanel, rear mudguard and engine mounts. Because of the last bits I'm building up a rolling chassis that I can bung the engine in when I've got everything ready. Looking through the bits that came off, I have two very tatty looking bits of 1/16" wall tubing of two different lengths that don't look like any manufacturer would produce...but I could be wrong. 1 is 15/16" long, the other is 5/16" bore of both is 9/16". Does this sound right? Are they meant to be different lengths? If the lengths are correct I'll spin something more suitable in the lathe as 1/16" tube looks a bit feeble.... i think.

Cheers Col
avatar
colk2004

Posts : 185
Join date : 2015-04-13
Age : 55
Location : York

Back to top Go down

Are these really the parts I'm looking for. Falcon 87 spacers

Post  colk2004 on Sun Jan 15, 2017 8:11 pm



Seamed tube and thin wall looks a bit amateur to me but is this right?

Cheers Colin
avatar
colk2004

Posts : 185
Join date : 2015-04-13
Age : 55
Location : York

Back to top Go down

Re: Falcon 87. Footrest spacers.

Post  fulmar88 on Mon Jan 16, 2017 7:09 am

Colin, yes, they look just like the type of spacers found on my Falcon (81). The smaller one on the left has wear on it similar to mine that was on the pivot shaft for the centre stand and sits within the 'eye' of the stand itself.

regards,
Steve.
avatar
fulmar88

Posts : 469
Join date : 2010-03-15
Age : 50

Back to top Go down

Falcon 87 footrest spacers.

Post  colk2004 on Mon Jan 16, 2017 1:02 pm

Doh! Not thinking. The plans for the centre stand and frame I have, show the spacers for the footrest bar. And they are indeed different lengths and not made of the heftiest tubing, to say the least. I think I'll be departing from (again) FBs original spec' and knocking up some aluminium ones of about 5mm wall thickness, so they sit better between the frame and the footrest. At a later date if I fancy getting the bike completely factory standard all these bits go into storage for swapping but at the moment, getting it in one piece and rideable is more important.

Cheers Colin
avatar
colk2004

Posts : 185
Join date : 2015-04-13
Age : 55
Location : York

Back to top Go down

Re: Falcon 87. Footrest spacers.

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum