Latest topics
» cruiser 80 brakes
Yesterday at 9:35 pm by intrudin

» oil seals for mid 50s rear shocks
Sun Feb 18, 2018 9:07 pm by bill2b

» oil seals for mid 50s rear shocks
Sun Feb 18, 2018 7:37 pm by bill2b

» More carb problems
Sun Feb 18, 2018 7:26 pm by Sgtbiro

» trials shake down run( a few teething problems) bike and rider
Sun Feb 18, 2018 7:26 pm by denman

» cruiser sports
Sun Feb 18, 2018 5:37 pm by sportscruiser

» Villiers gearbox dipstick for sale
Sun Feb 18, 2018 8:51 am by John Wakefield

» plating on falcon 67
Sat Feb 17, 2018 9:28 am by alan67

» 1954 Falcon 67
Thu Feb 15, 2018 10:51 pm by keith livingstone


Plover 95 Front wheel bearings

Go down

Plover 95 Front wheel bearings

Post  Kevin B Smith on Thu Oct 13, 2016 5:09 pm

Hi can anyone help?

I have my Plover 95 almost ready for the MOT but the front wheel bearings are not great. It has loose bearings with cup and cone. The bearings are not smooth - I have tried polishing the spindle on a lathe and has used new balls and grease but I cannot remove the "notchy" feel to the bearings. Two questions:
1. Can I get new spindles and cups anywhere?
2. Can I convert to "normal" bearings?

Thanks.

Kevin

Kevin B Smith

Posts : 20
Join date : 2015-05-10
Location : Worcestershire

Back to top Go down

wheel bearings

Post  piston 197 on Thu Oct 13, 2016 7:16 pm

Are you sure you have
A a plover 95?
or
B the correct front wheel ?
The plover 86 was the last Plover to use the small hub with the cup and cone bearings
The 95 should have the 5" hub which uses conventional roller bearings

The smaller hub can be machined out to take roller bearings, but not with the same spindle size, you will have to remake the spindle and wheel nuts in a smaller metric size ( I Have done it myself in the past) The only bearings with the correct size for the spindle are too big on the o.d. to machine the hub out without running out of metal
JH
avatar
piston 197
Moderator

Posts : 3745
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Plover 95 front wheel spindle

Post  Kevin B Smith on Thu Oct 13, 2016 7:31 pm

Hi,

yes I am sure it is a 95 - and yes I do suspect I have the wrong front wheel - especially as it has 4" brakes!!

However I guess the question still stands - and it looks like I need to machine out that hub then?

Kevin

Kevin B Smith

Posts : 20
Join date : 2015-05-10
Location : Worcestershire

Back to top Go down

front wheel

Post  piston 197 on Thu Oct 13, 2016 7:51 pm

Kev, it will be a better bet to change the front hub for the correct 5 " one, it is also possible if you have the wrong front wheel you probably have the wrong forks or fork bottoms ? if there are 2 cut outs in the bottom of the wheel spindle holes as you look from underneath then the forks are off an earlier Plover, in which case you are probably better off machining out the hub you have and remaking the spindle and nuts . If there are no cut-outs just 2 plain hoes then the forks are correct
The 5" brake is substantially better than the puny 4" item
JH
avatar
piston 197
Moderator

Posts : 3745
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Plover 95 Front wheel bearings

Post  Kevin B Smith on Thu Oct 13, 2016 8:11 pm

Hi,

Yes I do have cut outs so I also have the wrong fork legs - don't you just love old bikes!

Anyway I have just had a thought - I have found a bantam spindle that has the right cones and right threads - so perhaps the cups are the right size as well - and I have several bantam hubs and wheels - one for Friday!

Kevin

Kevin B Smith

Posts : 20
Join date : 2015-05-10
Location : Worcestershire

Back to top Go down

Re: Plover 95 Front wheel bearings

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum