Latest topics
» Rewire to direct lighting
Today at 2:30 pm by dalgrae

» 8E Timing check
Yesterday at 7:51 pm by kerabo

» A few Falcon parts
Yesterday at 2:31 pm by kerabo

» Model 87 handle bars
Yesterday at 6:06 am by banjo boy

» Sun 98cc identification of parts
Thu Apr 27, 2017 8:01 am by kerabo

» Pannier Equipment
Tue Apr 25, 2017 4:33 pm by piston 197

» Francis B wanted
Tue Apr 25, 2017 3:42 pm by bart

» Cruiser 80 carburettor o rings.
Tue Apr 25, 2017 11:03 am by fulmar88

» tank badges
Mon Apr 24, 2017 9:17 pm by FrankG


25T gearbox rebuild

View previous topic View next topic Go down

25T gearbox rebuild

Post  BarnettBilly on Thu Oct 13, 2016 6:39 am

Hello all,

Having experienced a slipping first gear and then being unable to select first gear, I have stripped the gearbox and found the first gear on the mainshaft has lost two gear teeth.
I have reassembled the gearbox with a donor gear but i'm not certain on the correct reassembly. I have a service book which gives instructions, but to me they are a little ambiguous. Are there any full proof tips that someone could pass on please, for instance, I presume the selector fork cams sit on the top recess on the cam plate on reassembly?
If I get it wrong then there's a lot to strip down again!
Regards
Christian
avatar
BarnettBilly

Posts : 88
Join date : 2012-01-06
Location : Ferndown, Dorset

Back to top Go down

Re: 25T gearbox rebuild

Post  fulmar88 on Thu Oct 13, 2016 11:08 am

I may be wrong but I think member Kerabo has experience with AMC gearboxes and may have a guide he can share with you. Suggest you send him a PM.

Steve.
avatar
fulmar88

Posts : 470
Join date : 2010-03-15
Age : 50

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum