Latest topics
» Still looking
Yesterday at 8:43 pm by Sgtbiro

» Leaky Seagull
Yesterday at 9:06 am by keith.hodgenia

» Falcon 87 wiring
Wed Jul 26, 2017 9:17 pm by kerabo

» Cruiser 80 centre stand parts wanted
Wed Jul 26, 2017 2:49 pm by Sgtbiro

» falcon final drive sprocket
Wed Jul 26, 2017 1:47 pm by piston 197

» Cruiser 39 exhaust repairs in Australia, carby, etc etc.
Wed Jul 26, 2017 10:55 am by Maurice Chivers

» Falcon 81 wiring..
Wed Jul 26, 2017 8:02 am by FB vincent

» Belgian Powerbike 98cc
Wed Jul 26, 2017 6:54 am by FB vincent

» NEW CLUB MEMBERS
Tue Jul 25, 2017 8:18 pm by 1953Man


Will it fit?

View previous topic View next topic Go down

Will it fit?

Post  mike Sayer on Thu Feb 11, 2016 7:45 pm

Hi all, a member friend rang me today to ask if a 2T engine would fit in place of the AMC engine currently in his bike. The frame & engine numbers of the bike in question are HF 92359 & V20T 9387 respectively. I think these numbers refer to a 1965 Falcon 87. I do know that the 2T slots straight into the Cruiser 84 frame with no alteration to the frame at all, but I don`t know about the Falcon 87 --------But, I bet I know a man who does!! Can you extend the enormous amount of help & advice you give to members, to help yet one more member, please John.
Regards & thanks,
Mike Sayer. Wink
avatar
mike Sayer

Posts : 219
Join date : 2008-02-12
Age : 77
Location : east of England

Back to top Go down

engine swap

Post  piston 197 on Thu Feb 11, 2016 7:49 pm

2T into AMC 20T mounts will not fit, the engine will physically fit in the frame, but engine mounts will need to be altered/fabricated to fit the 2T engine into the Falcon 87 frame.
On the other hand the 2T will slot straight into the cruiser 68,71,75,80 and 84 mounts (and of course the 89 and 91 where it is normally fitted)

JH
avatar
piston 197
Moderator

Posts : 3458
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

engine swap

Post  mike Sayer on Thu Feb 11, 2016 7:58 pm

Thanks once again John, but tell me, why did it take you all of 4 minutes to reply to my query!!??
Priceless!
Mike Sayer

PS For Roy, there, I told you so! Very Happy





11//
avatar
mike Sayer

Posts : 219
Join date : 2008-02-12
Age : 77
Location : east of England

Back to top Go down

Bit slow

Post  piston 197 on Thu Feb 11, 2016 8:00 pm

Yes sorry , a bit slow with my response !
i was composing another topic on tank sealing on the push in cruiser fuel caps !
JH
avatar
piston 197
Moderator

Posts : 3458
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Engine change

Post  kerabo on Fri Feb 12, 2016 9:21 am

I am not sure where but I came across an 87 fitted with a twin within the last week or two. Well it was a FB with 5" brakes so assume it was an 87. I think if I was to do this I would update at least the front brake.
Regards Ken
avatar
kerabo

Posts : 1991
Join date : 2008-02-11
Age : 67
Location : Falcon 87. Trials 93 Special. Powerbike 56. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

It has been done !

Post  piston 197 on Fri Feb 12, 2016 9:26 am

Yes ken, I have seen FB Falcon 87 and James Captain L20 that have been fitted with 2T engines, but as said before it is an engineering exercise as the mounts are different, whereas the 1H and AMC 25T exchanges are a straight drop-in with no engine mount modification .
JH
avatar
piston 197
Moderator

Posts : 3458
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Re: Will it fit?

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum