Latest topics
» Newbie Here
Yesterday at 9:16 pm by MoscowFlyer

» New Francis Barnett
Yesterday at 6:47 pm by banjo boy

» Best Oil to use
Yesterday at 5:32 pm by Sgtbiro

» Villers 14A seagul engine HELP
Yesterday at 8:14 am by JonTheBuilder

» pivot tube
Fri Jan 19, 2018 5:54 pm by ernie

» Double lift centre stand
Fri Jan 19, 2018 4:24 pm by FB vincent

» Contact breaker screw
Fri Jan 19, 2018 1:56 pm by jasperbell

» AMC 250CC CARB
Thu Jan 18, 2018 7:44 pm by MR SINBAD

» VILLIERS 1H
Thu Jan 18, 2018 9:37 am by piston 197


clutch conversion

View previous topic View next topic Go down

clutch conversion

Post  andy-s on Sun Jan 24, 2016 6:29 pm

Hello all. I have been trying to adjust the clutch on a 8e with a 3 speed box . Its in a James Capt trials (started as a road bike) . as far as I know the box is a standard road spec . Its got a 18 teeth engine sprocket , a smaller final drive sprocket 12 teeth I think and a 60 teeth rear sprocket .All in all the gearing is good for me , pulls well in first even with me on it. I just cant seem to get the clutch right . Over tight and it will slip when trying to kick it over then slacken it off a bit and it wont disengage the drive totally when stopping . I did fit new corks and use transmission fluid in the chain case as part of the engine referb, just not sure what to try next . This is the only 3 speed box I own, so no expert by any means. Is it worth going for a 9e clutch conversion? and is it worth the money? or is there a simple fix I am missing?
Thanks in advance
Andy
avatar
andy-s

Posts : 124
Join date : 2012-09-17
Age : 50
Location : Frome

Back to top Go down

clutch adjusment

Post  piston 197 on Sun Jan 24, 2016 8:21 pm

The springs should be tightened fully in for the clutch to be working correctly
Second point the 9E clutch conversion is well worth the money, you will need a 9mm spacer between inner and outer case, and you need to have the 8E clutch sprocket grafted on the 9E clutch to keep the gearing the same as the 9E clutch standard has 38 Teeth and the 8E one has 52
JH
avatar
piston 197
Moderator

Posts : 3720
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum