Latest topics
» Newbie Here
Yesterday at 9:16 pm by MoscowFlyer

» New Francis Barnett
Yesterday at 6:47 pm by banjo boy

» Best Oil to use
Yesterday at 5:32 pm by Sgtbiro

» Villers 14A seagul engine HELP
Yesterday at 8:14 am by JonTheBuilder

» pivot tube
Fri Jan 19, 2018 5:54 pm by ernie

» Double lift centre stand
Fri Jan 19, 2018 4:24 pm by FB vincent

» Contact breaker screw
Fri Jan 19, 2018 1:56 pm by jasperbell

» AMC 250CC CARB
Thu Jan 18, 2018 7:44 pm by MR SINBAD

» VILLIERS 1H
Thu Jan 18, 2018 9:37 am by piston 197


Cruiser 89 clutch cable run

View previous topic View next topic Go down

Cruiser 89 clutch cable run

Post  OldRocker on Fri Aug 28, 2015 5:41 pm

I'd be grateful for words of wisdom on the clutch cable run on my '62 Cruiser 89. I've taken it under the tank and down the offside of the chainguard and across but it is close to the chain and is pretty stiff. Plenty of oil down it. Think I must be getting daft in my old age !
avatar
OldRocker

Posts : 5
Join date : 2014-04-30

Back to top Go down

Cable run

Post  MoscowFlyer on Fri Aug 28, 2015 10:02 pm

Hi, you send the cable forward under the engine, then up through the front frame section coming out through a hole on the nearside next to the headstock, then up to the handlebar lever. Sometimes there is a hole in the top yoke of the forks for the cable to pass through. Mike
avatar
MoscowFlyer

Posts : 1064
Join date : 2008-02-21
Age : 71
Location : Leicestershire

Back to top Go down

No Wonder....

Post  OldRocker on Sat Aug 29, 2015 5:05 pm

I was miles out ! Many thanks Moscow Flyer - I shall re-route and with luck may get the Cruiser back on the road this year. Only the charging to sort out...
avatar
OldRocker

Posts : 5
Join date : 2014-04-30

Back to top Go down

Re: Cruiser 89 clutch cable run

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum